1.1Welcome and screen tour
Know where everything is, so every later lesson is only about quantities.
You will learn
- What AgileBOQ measures and produces
- The seven areas of the screen
- The four layouts and the two modes
- Where the live estimate is and how it updates

Lessons
- 1.1.1
What AgileBOQ doesLesson 1.1.1
You model the building once (from PDF, CAD or BIM drawings, or by hand) and AgileBOQ measures it as you draw: a Bill of Quantities in the format you choose (SMM for Africa 2015 (AAQS), NRM2, SMM7, ASAQS and more), a Bill of Materials, a bar bending schedule, room finishes, rate analyses, a 4D programme, cash flow and valuations. Every quantity links back to the element it came from.
▶ Video lesson · 6 min · with Grace and David · demonstrated on Riverside Court
- 1.1.2
Open the appLesson 1.1.2
Go to www.agileboq.com and click Open AgileBOQ. It runs in Chrome or Edge on a Windows or Mac computer (not on phones or tablets). You can also install it as a desktop app from the browser menu; it then opens from your desktop and keeps working offline for up to 7 days.
▶ Video lesson · 5 min · with David and Grace · demonstrated on Riverside Court
- 1.1.3
The ribbon tabsLesson 1.1.3
At the top: Start, then the tabs Home, Structural, Steel, Architectural, MEP, Composite, External, Interior. Each tab holds the tools and ready-made library items for that discipline, with an indicative rate under each item (for example ≈ RWF 72.5k/m). The small number on a tab counts the elements of that discipline already in the model.
▶ Video lesson · 5 min · with Grace and David · demonstrated on Riverside Court
- 1.1.4
The Home tabLesson 1.1.4
Tools you use all the time: Select (V), Sanity check, Trim walls, Cut, Corner, Copy to floor, Move to floor; setting out (Smart grid, Grid L); and the drawing tools Measure (M), Scale (K), Move PDF, Match floor and Set 0,0.
▶ Video lesson · 5 min · with David and Grace · demonstrated on Riverside Court
- 1.1.5
LayoutsLesson 1.1.5
The buttons in the middle of the top bar switch the layout: Plan, Plan + 3D, Plan + 3D + Bill, 3D + Report and 3D. Next to them, Model view (look only) and Model edit (draw and change). On the right, the active level, for example ▾ +0.00 Ground Floor.
▶ Video lesson · 5 min · with Grace and David · demonstrated on Riverside Court
- 1.1.6
The plan toolbarLesson 1.1.6
Above the plan: Library (every ready-made element, with search), Steps n/8 (the guided path for a new project), Sections, Site (site and substructure settings), Drawing (the drawing under this level), Undo/Redo and Shadow.
▶ Video lesson · 5 min · with David and Grace · demonstrated on Riverside Court
- 1.1.7
The bottom barLesson 1.1.7
The tabs Modeling, BQ, BOM, BBS, Measurements, Rate analysis, Databank, Specification, Settings, Report switch between the model and the documents. Below them: project name, currency, units (m or ft·in), + New project, the projects folder, and the live Estimate excl. VAT, GFA and Cost / m² GFA.
▶ Video lesson · 4 min · with Grace and David · demonstrated on Riverside Court
- 1.1.8
The status barLesson 1.1.8
At the very bottom: cursor coordinates, a hint for the current tool, 🔍 Find a tool (Ctrl+K), ⌨ Shortcuts, and the switches Grid snap (10, 50, 100 or 500 mm), Endpoint snap, Ortho, Grid lines and Drawing snap, plus the plan scale (1 m = n px).
▶ Video lesson · 5 min · with David and Grace · demonstrated on Riverside Court
- 1.1.9
Panels on the rightLesson 1.1.9
Click an element and its Edit panel opens beside it: mark, sizes, materials and its own quantities and amount. Panel › opens the full side panel with the tabs Selected, Levels, Site and Drawing.
▶ Video lesson · 4 min · with Grace and David · demonstrated on Riverside Court
- 1.1.10
Move aroundLesson 1.1.10
Wheel to zoom, right-drag or Space-drag to pan, Home to fit. In 3D, drag to orbit; use Explode, Floors and Layers at the bottom, and Walk inside to walk through the building.
▶ Video lesson · 4 min · with David and Grace · demonstrated on Riverside Court
Watch (free video tutorials)
Pro tips
- Work in Plan + 3D while you learn: every click on the plan shows at once in 3D.
- Hover any button to read what it does and its keyboard shortcut.
- Watch the estimate in the bottom bar while you model. A sudden jump is often a typing mistake (300 instead of 0.3).
Common mistakes
- Drawing on the wrong floor. Always glance at the active level (top right) before you draw.
- Staying in Model view and wondering why nothing can be drawn. Switch to Model edit.
Exercise
Open AgileBOQ. Switch through all five layouts, open each ribbon tab, and find: (1) the live estimate, (2) the Find a tool button, (3) the Library, (4) the Drawing button above the plan.
Check yourself · 4 questions
Answers: 1. In the bottom bar, next to GFA and Cost / m² GFA · 2. Plan + 3D + Bill · 3. How many elements of that discipline are in the model · 4. Chrome or Edge on a computer




